Zahabiya Chemcial Industries, Karach, Pakistan - ISO Certified - Adhesives, Sealants, Construction Chemicals, Water Proofing & Sealing Compounds for multifarious industrial and commercial utilities
 
 
 
 
Range of Metal Packaging Products
CAN SEALING COMPOUNDS
Nozzle Lining Compound NLC-01
Die Lining Compound DLC-02
Cano'sol Compound VC-803
Seam Dope SD-04
DRUM SEALING COMPOUNDS
Drum Lining Compound DMLC-030
Baro’sol Compound VC-804
OTHER SEALING COMPOUNDS
Transparent Sealer TS-141
Seam Seal SS-052
Twist-Off Cap Compound VC-808
Lid-Sealsol LS-809
 
Zahabiya Chemcial Industries, Karach, Pakistan - ISO Certified - Adhesives, Sealants, Construction Chemicals, Water Proofing & Components for multifarious industrial and commercial utilities
Adhesives, Sealants, Construction Chemicals, Coatings, Water Proofing and Sealing Compounds for multifarious industrial and commercial utilities time tested since 1972

Please consult the individual product data for further details

Zahabiya provides a complete solution of the adhesives, sealants & coatings for Metal Packaging Industries. Zahabiya's range of Can & Drum Sealing Compounds, are polymers reinforced rubberized sealing/ lining compounds, used in the fabrication of tin containers, composite cans, collapsible tubes, drums & barrels etc. having metallic (tin) top/bottom ends to provide a liquid gasket between the ends and the body to prevent any possible leakage/seepage of the contents. We also provide internal & external side seam sealer for tins/cans, pinhole leakage repair sealer, twist off cap compounds, liquid gaskets for metallic conical pail lids etc. Please browse through the PRODUCT SELECTOR in order to select the most appropriate grade of product for your requirements.

For general purpose and food packaging related tins/cans, different grades of our Zahabiya Nozzle Lining Compound NLC-01 and Die Lining Compound DLC-02 are used, selected on the basis of the application system and cans' contents (see table below). This range of products is a fine aqueous dispersion of acrylic copolymers, synthetic / natural rubber latex, containing other essential resins and additives which on perfect drying (curing), provide an Air-Tight double seam of the tin cans applied in. The cured film is Non-Toxic, Non-Poisonous & Non- Rusting to Tin Plate/TFS, provided used in the same original form, as supplied. Used for Round, Oval, Oblong, Rectangular tin cans applied by the mechanised system.

These products are Non-Flammable, Safe in Handling, Non-Toxic and Non-Rusting to Tinplate/TFS and are perfectly safe for contact with edible products (after complete curing) and conform to the requirements of FDA CFR21 175.300 Regulations for Indirect Food Contact.
 
 
 
Zahabiya Cano'sol Compound VC-803 is mainly recommended for highly aggressive solvents and other corrosive products. It is a PVC Plastisol based one component liquid gaskety material applied through Nozzle or Die lining system to provide double seam of the round as well as rectangular tin/metal cans. The applied ends can only be cured by oven at above 150°C. Such cured gasket resists corrosive and aggressive solvents and can be used in tin/cans meant for packaging of special paints, varnishes, thinners, lacquers, fuels, oils, PESTICIDES, INSECTICIDES and such other corrosive products. Dried film of this compound is non-toxic, non-poisonous and non-rusting to Tinplate/TFS.
   
 

Zahabiya Seam Dope is a water-based gummy dope possessing excellent film forming properties on air drying, providing an air-tight seam of the container ends. This is applied wet on the assembly line, which on perfect drying transforms into a non-brittle and non-sticky invisible plastic gasket. Mainly used for cans made with unlined tops/bottoms. However, often used with lining compound applied ends too, to overcome production line deficiencies resulting in leakages of cans from top/bottom seams such as sheet temper variations, chuck plate/seaming roller being worn out, play in the seaming machine head etc.

Two grades: SD-042 (Super) and SD-043 (Special) are available. Seam Dope Special SD-043 is a broad spectrum sealant with excellent film formation. These products are safe in handling, non-toxic and non-rusting to tinplate.

Zahabiya Seam Dope SD-04 complies with FDA regulations for Indirect Food Contact. Please consult product’s literature to select the grade which best suits your requirements.

   
 
Zahabiya Drum Lining/ Sealing Compound DMLC-030 is a blend of acrylic resins with various natural and synthetic rubber resins, essential additives and preservatives to provide perfect sealing of the top and bottom ends of metal drums meant for variety of applications including Food Products, Edible Oils, Lubricating Oils, Petroleum Products, Solvents, Mild Aggressive/ Corrosive Chemicals, Lacquers, Solvents, Insecticides, Pesticides, Herbicides. This Non-Toxic, Non-Hazardous and Safe in Handling product is applied on the top/bottom flange area by brush or spray lining system either at the time of or prior to the seaming operation and is preferably oven cured to obtain best results. The cured (dried) layer/gasket is non-poisonous, non-corrosive & non-rusting on contact with metal surfaces. The product is perfectly safe for edible products and complies with FDA 21CFR 175.300 regulations for Indirect Food Contact.
   
 
Zahabiya Baro'Sol Compound VC-804, like VC-803 is recommended for drums/ barrels meant for highly aggressive solvents and other corrosive products. It is a PVC Plastisol based one component gaskety material applied through Nozzle or brush to provide double seam of the metallic drums. The applied ends can only be cured by oven at above 170°C for at least 10 minutes. Such cured gasket resists corrosive and aggressive solvents and can be used in drums meant for packaging of paints, varnishes, thinners, lacquers, fuels, oils, pesticides, insecticides and all such other corrosive products. Dried film of this compound is non-toxic, non-poisonous and non-rusting to metal surface.
   
 
It is a clear transparent product possessing rapid air drying properties mainly used, internally as well as externally, on production line or sometimes after filling for recovery/repair of leaky cans which otherwise on test are rejected & eventually destroyed loosing the entire value of the can. It is also used as unvisible External Side Seam Sealer/ Lacquer, on welded side seams, lugs weld spots protection and rust protection lacquer for metal components and other exposed to weather surfaces. This is equally good to be used for crimp sealing of screw neck on to the top of the can. This product complies with FDA regulations for Indirect Food Contact.
   
 
 
Zahabiya SEAM SEAL SS-052 is a water-borne, acrylic resin based, air-drying one component seam sealer, used by the metallic cans/ pails manufacturers for application at internal side seam to provide a protective coating to prevent any possible leakage/ seepage of the contents, along with protecting the side seam from rust/ corrosion. It is Non-Toxic, Non-Hazardous and safe in handling being a “Human Friendly/ Environmentally Acceptable Product”. It has good bonding on both bare as well as lacquered/ coated tin plates and therefore can be used for tin cans meant for variety of contents including regular food items, special food products such as pickles, olive oil, cheese etc., edible oil, lubricating oil, greases, paints, varnishes, lacquers, insecticides, pesticides, herbicides and other mildly corrosive products. The product is completely safe for use in cans meant for food packaging and conforms to the requirements of FDA CFR21.300 Regulations for Indirect Food Contact.
   
 
 
Zahabiya Twist-Off Cap Compound VC-808 is Vinyl Resin based, heat curing one component liquid gasket compound, used in the application of Twist-Off Caps and other metallic caps to provide a soft, air-tight seal/gasket to prevent any possible leakage/seepage; of the contents to be filled in. On perfect (heat) curing, the liquid forms a flexible gasket, un-affected by atmospheric variations and normal wear and tear. The cured gasket is Non-Toxic, Non-Poisonous, Non-Oxidising & Non-Rusting to Tin Plate/TFS and other metals, provided used as supplied. Suitable specifically for the Metallic Lacquered Caps/Lids used to close glass bottles/jars for a wide range of food products. This product complies with FDA regulations for Indirect Food Contact.
   
 
Zahabiya Lid-Sealsol LS-809 is Vinyl Resin based, heat curing, one component, gasket compound, used by metallic pails manufacturers at the metallic top lids' grooves to provide a soft spongy seal/gasket providing a cushion between both pail body and its lid, to prevent any possible leakage/seepage of the contents to be filled/ packed in. The product is poured into the mould/ lid top cavity through pressure activated lining machine and cured in oven at around 180°C for about 10 minutes which on complete curing provides a soft rubberised flexible gasket ring. On perfect curing, LS 809 is Non-Toxic, Non-Corrosive & Non-Rusting to metal sheet, provided used as supplied. The product is safe in handling and contact. Suitable mostly for the small metallic drums and pails meant for packaging/ filling a very wide range of products e.g. SPECIAL FORMULATED PRODUCTS PAINTS, VARNISHES, LACQUERS, LUBRICATING OIL, GREASE, PESTICIDES/INSECTICIDES and such other corrosive products.

Special Food Packaging Grade is available upon request.

   
Zahabiya Chemcial Industries, Karach, Pakistan - ISO Certified - Adhesives, Sealants, Construction Chemicals, Water Proofing & Components for multifarious industrial and commercial utilities
© Zahabiya Chemical Industries | Rights Reserved | Best viewed 1024 x 768
  
Site Designed & Maintained by: ANA-international.net