This is Plastisol Compound suitable for metal endless air filters which cures only on stoving at the suggested temperature.
It is a heat curing one component P.V.C. based moulding material, especially formulated to form smooth soft seals/gaskets on proper curing at 150°C to 180°C. The filter paper is placed in the die containing liquid plastisol and heat cured. The product is safe in handling, non-flammable, non-toxic, non-corrosive, non-cracking, non-rusting to metal, cold and hot water proof, vapour barrier, fuels, oils and solvent proof. The smooth, flexible, solid end seal (gasket) of permanent nature obtained at 150-180°C is unaffected by atmospheric variations & normal wear and tear.

Download Complete Detail
Go Top  
  

Zahabiya Nozzle Lining Compound NLC-01
This is a rubber based product best for sealing metal ends to body of Oil/Diesel filters through end seaming operation to provide a gasket within the seam

Download Complete Detail
Go Top  
   

Zahabiya Thermo Sealant -15/99
The product is a heat curing one component P.V.C. based coating compound, thixotropic in nature, especially formulated to form thick insulating coating to perform sound deadening function. This product is characterized by a high gelation rate and minimum settling at low viscosities. It dries up or cures only after heat treatment to give a textured, flexible sealing coat of permanent nature, unaffected by atmospheric variations & normal wear and tear & abrasion resistance. 
This is a ready made undercoat sealer mainly used during the assembly of automobiles in the form of under coats which are moulded on to the underneath metallic surfaces exposed to atmospheric wear and tear, exhibiting excellent lube & fuel/oil resistance. 

Download Complete Detail
Go Top  
  

Zahabiya General Purpose Adhesive -7
This is a vinyl-rubberized water based multi purpose adhesive, which after drying becomes water, oil, fuel and diesel resistant, suitable for making C.A.V. filters at the paper to paper and paper to metal spool adhesive.

Download Complete Detail
Go Top  
  

Zahabiya Adhesive Sealant Paste 
This is a solvent based Air drying product, suitable for making Yamaha/Atlas Honda & other Motor Cycle Air filters to bond paper element to plastic cap and cup.

Download Complete Detail
Go Top  
   

Zahabiya Sealing  Compound SC-13/63
Suitable for both Air and Oil filters manufacturing. This is an air drying product but its properties become excellent on stoving at recommended temperature. Because of both air drying and oven curing nature of the product, it serves as versatile adhesive, completely eliminates the use of thermoset sealant. This product is ideal for making Air filters using white filter paper having tendency of the paper turning pale on stoving, which is completely avoided as no stoving required, resulting in retaining the original look of the paper intact.

Download Complete Detail
Go Top  
   

Zahabiya Transparent Sealer TS-14 
It is useful as the clear sealer coat esp. at under body sealing areas to protect from rusting and as the protective primer coat, resisting weather variations. Also applied on all close joints for perfect vapour barrier, water proof, non-rusting lacquer. Best for inside/outside protective coating of fuel tanks.
On application, it quickly dries up into a clear, strongly bonded glossy film with Non-cracking/Non-peeling results. The cured protective film becomes tough, shock, impact and abrasion resistant.
The product is used to protect the surface from rusting, corrosion and to make the leakage free seams and joints in Automobile, Engineering and Metal Fabrication Industry.

Download Complete Detail
Go Top